How to Revive the Inside of Your Wooden Furniture with Oil and Wax

#TUESDAYTIPSWITHFALLON

 

After you have painted and/or restored the outside of your furniture, sometimes the inside needs revamping, too. In this #tuesdaytipswithfallon you will learn a quick way to bring the scratched, dried out wood back to life without adding any additional color or stains. I will cover that information in another #tuesdaytipswithfallon down the road.

Materials:

Lint Free Cloth

Chip Brush

Old Barn Milk Paint, Oil and Wax

 

Step 1: Roll the bottle of Oil and Wax from Old Barn Milk Paint. Do not shake. Once it is mixed well, pour a little bit out onto your piece and start spreading it out with your Chip Brush.

Step 2: After you have covered all of the interior areas with the Oil and Wax, grab your lint free cloth and rub the Oil and Wax into the wood. If there is any excess that has gathered in certain areas, rubbing it in will help it absorb quicker and more efficiently.

That’s it! Just makes just it is nice and dry before you place any items on the inside shelves.

*Please note, on the bottle it says you may need 3 coats for better protection, but since this is on the inside of your furniture, one coat should suffice. If you were using this on the top of a table or cutting board, I would recommend additional coats.

 

Thank you so much for stopping by! Make sure you tune in each week for a new tip! Look forward to seeing you then. Happy revamping!!

ADD ZIBRA LOGO WITH AFFILIATE LINK!!